10 Things You've Learned In Kindergarden That'll Help You With Replacing A Window Handle

Tips For Replacing a Window Handle

Switching the handle on your window is a simple task that can be accomplished in the comfort of your own home. Use these helpful tips to ensure an easy operation and a beautiful look.

Start by removing the screws to expose the screws inside your uPVC window handle. Then measure the spindle length to ensure that you receive the right size replacement.

1. Determine the Spindle Length

When you're replacing a window handle, it's important to get the size of the spindle correct. This is because it can determine how tight or loose the handle is and whether it's able to lock properly within the frame of the window. The spindle is the steel shaft that connects to the handle and to the lock inside the window frame. The spindle is either a standard industry 8mm cross-section or the earlier 9mm versions. Modern industry standards are 8mm but it wasn't always that way. It is crucial to check the measurements when buying a new handle.

Take the handle off. This can be done easily by turning the handle into the open position, and unscrewing two screws that secure the handle (which are often hidden behind plastic caps which will need to removed). After removing the handle, measure from the base of the handle until the end of the spindle. This will give you the measurement needed to purchase a new one.

There are many options when it comes to choosing a new window handle, from sleek chrome that fits into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms, or the more quaint Tudor cottages with curved monkey tail latches! The possibilities are endless, but the most important thing to do is choose a style that suits your home.

Espag handles are usually installed to uPVC windows and are identical in size with 43mm centres (2 fixings). Cockspur handles can vary from 58mm to 62mm but luckily there are replacements available for both sizes. Cadenza window handles have a different size due to their angle blade that operates an interlocking mechanism that is multi-point inside the window.

When choosing a window handle take into consideration the hand you use to open your door. Inline espag window handles are not hand-operated and can be used for left or right handed windows. Cranked window handles are handed and are only used on windows that open in one direction.

2. Remove the Handle

If the handle is damaged or worn out the handle of a window that falls off can be a real pain. However, the good part is that replacing a uPVC window handle is a simple task that you can complete yourself. All you need are the most basic tools and some time to complete the job.

You will need to first open the window and then ensure that it's not locked. Then, remove the screws that hold the handle in place. Once these caps are removed, you can begin working on removing the handle itself.

The handle itself is fixed to a spindle in the window frame. This is either held in place by screws or pins, depending on the type of handle. The most common handle types are inline Espagnolette handles and cockspur handles. Both kinds of handles are found on casement windows including aluminium ones. The handles can be locked with a key in order to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.

To remove the handle, you'll need an screwdriver with a flat blade in order to remove the clip that holds the handle. Once this is released, the handle will fall off the spindle. Once the old handle is removed, you will need to measure the length of the spindle to ensure that your new handle is compatible with this size.

Once you have determined the proper size of the handle, screw it in the correct position. You will need to make sure that the new handle is firmly attached and that it turns in the correct direction (clockwise for open and counterclockwise for closed). It is also crucial to ensure that it has not been fitted upside down.

Finally, you should replace the screw cover caps. Once you have done this you can test the handle to make sure that it works properly. You can also test the locking system by moving the handle from an unlocked position to the locked position and back.

3. Remove the Screws

A uPVC handle is a crucial component of any house and is the first thing that shows signs of wear or damage. This can be caused by natural factors or through regular use, or malicious damage caused by opportunistic criminals who seek to open a closed window and gain access to your home. A simple repair can fix the issue and stop it from happening again.

UPVC handles can be difficult to open when the locking mechanism isn't functioning properly. Often, the problem can be solved by replacing the multipoint lock, rather than the entire handle, and it's definitely worth a look because it could save you money.

After removing the old handle, you'll have to take off any screws that were holding it in place. They are usually located on the inside face of the base. You may need to use an screwdriver to do this, and it's crucial to not over tighten the screw as this could cause the handle to become loose.

The next step is to find the fixing pins or screws that hold the new handle in the correct position. These are usually located on the inside of the handle base. You will need a screwdriver to remove them. After you have removed them, you'll be required to replace the caps on screws if you wish to do so, and then test the new handle to ensure it's working correctly.

When you're ready to install the new handle, simply align the spindle with the cut-out in the window mechanism and screw it in the right position. If you're looking to replace the screw covers ensure that the handle is in a position that is open and that the screws are securely attached. Once this is complete you're all done and you are able to enjoy your new window handle. Hopefully this will help you to save money on window and door replacement services in the future. Contact us if you need more information on this or any aspect of your uPVC window.

4. Fit the New Handle

Whether you're replacing a broken handle or simply changing it the procedure is easy and can be accomplished in a matter of a few steps. Identifying  upvc door handle repairmywindowsanddoors.co.uk  of window handle, determining its spindle length, and knowing what tools you'll need to complete the task are key. Safety is always the first priority when working with windows and tools. Take your time to follow the steps and make sure that you have an appropriate handle to use.

The first step is to locate the screws holding your existing window handle and take them out, while maintaining a safe hold on the handle to prevent it from falling and result in injury. Once the screws have been removed they can be repositioned in a safe place to be replaced in the future.

After you have removed the handle, you can begin installing your new handle. The handle should be perfectly positioned in order to function correctly and secure the window in its closed position. The next step is to slide the metal square at the back of the handle into the hole in the window mechanism, ensuring that it fits securely.

Once your new handle is installed, the final step is to replace the caps on the screws and test it to make sure it works. If you are not satisfied with the result or if your window does not open or close correctly, call our experts for help.

The majority of UK homes are equipped with uPVC Windows. Therefore, a large number of windows will require replacement at some point because of wear and tear or breakage. The process is relatively straightforward and can be carried out by anyone with a bit of experience in DIY. It is crucial that the handle you choose matches the size and style of the window. Contact us if you are unsure about the type of handle you require. They'll be able guide you through all the options.